Technical textiles. Application-led selection.+8613370080785

Selection guide

Start with the exposure, not a temperature headline

A practical brief for separating continuous heat, short peaks, contact and the role of each textile layer.

Reviewed 2026-11-16 · 5 min read

Describe the job in a sentence

Begin with the object that needs protection and the process nearby. “A removable cover around a valve” gives a different starting point from “a horizontal cover beneath welding work.” Add the location, installation direction and how the material will be handled.

Use the application description to decide what evidence to request. A fabric name helps organize material comparisons, but it does not describe the complete operating conditions.

Separate the ways heat reaches the textile

Record whether exposure comes from nearby hot equipment, a touching surface, sparks, molten particles or flame. Manufacturer guidance distinguishes these conditions because a headline temperature does not answer every application question.

  • State continuous operating conditions and short-duration peaks separately.
  • Add the duration and frequency of each exposure.
  • Identify direct contact, distance, orientation and movement.
  • Describe oil, cleaning chemicals, moisture and abrasion around the installation.

Specify the finished construction

A coated cloth has both a substrate and a surface treatment. The finish can impose different limits from the underlying fiber. Ask for information on the finished grade rather than combining numbers from unrelated base-fiber and coating documents.

For a layered insulation assembly, label the hot face, insulating core and external cover on a simple sketch. Note seams, closures and supports. This helps separate a roll-fabric request from a request for an engineered finished assembly.

Turn uncertainty into a question list

If a parameter is unknown, record it as unknown and explain how it might be measured or confirmed. Do not turn an estimate into a specification without identifying it. A useful first enquiry can contain open questions.

Before any trial, the responsible technical team should agree the sample identity, exposure conditions and acceptance criteria. Keep the resulting evidence attached to the exact tested construction.

Useful material comparisons begin with a clear exposure description and grade-specific evidence.